Effect of treatment with phosphate, casein phosphopeptide and fluoride on the remineralization: in vitro study.

This study aimed to evaluate in vitro the effect protocols and anticaries agents containing casein amorphous calcium fluoride phosphopeptide-phosphate (CPP-ACPF, MI Paste Plus), sodium trimetaphosphate (TMP) and fluoride (F), in remineralization of caries lesions. Bovine enamel blocks with initial caries lesions were divided into groups (n = 12): 1) Toothpaste without F-TMP-MI Plus (Placebo); 2) Toothpaste 1100 ppm F (1100F), 3) 1100F + MI Paste Plus (1100F-MI Paste Plus), 4) Toothpaste with 1100F + Neutral gel with 4,500 ppm F + 5%TMP (1100F + Gel TMP) and 5) Toothpaste with 1100F + Neutral gel with 9,000 ppm F (1100F + Gel F). For the 4 and 5 groups the gel was applied only once for 1 minute, initially to the study. For the 3 group, after treatment with 1100F, MI Paste Plus was applied 2x/day for 3 minute. After pH cycling, the percentage of surface hardness recovery (%SHR); integrated loss of subsurface hardness (ΔKHN); profile and depth of the subsuperficial lesion (PLM); concentrations of F, calcium (Ca) and phosphorus (P) in enamel was determined. The data were analyzed by ANOVA (1-criterion) and Student-Newman-Keuls test (p < 0.001). Treatment with 1100F alone led to ~ 28% higher remineralization when compared to treatment with 1100F associated with MI Paste Plus (p < 0.001). The 1100F and 1100F + Gel F groups showed similar values for %SHR (p = 0.150). 1100F + Gel TMP treatment also remineralized the enamel surface by ~ 30% and 20% when compared to the 1100F + Gel F and 1100F groups (p < 0.001). The lower lesion depth (ΔKHN) was observed for the 1100F + Gel TMP group (p < 0.001), where it was 54% and 44% lower in comparison to the 1100F and 1100F + Gel F groups (p < 0.001). Polarized light microscopy photomicrographs showed subsurface lesions in all groups, but these lesions were present to a lower extent in the 1100F + Gel TMP group (p < 0.001). Treatment with 1100F + Gel TMP promoted an increase in the concentration of Ca in the enamel by ~ 57% and ~ 26% when compared to the 1100F and 1100F + MI Paste Plus groups (p < 0.001), respectively. There were no significant differences between the 1100F, 1100F + MI Paste Plus and 1100F + Gel F groups (p > 0.001). Similar values of P in the enamel were observed in the 1100F, 1100F + MI Paste Plus and 1100F + Gel F groups (p > 0.001), except for the 1100F + Gel TMP group, which presented a high concentration (p < 0.001). We conclude that the 1100F+TMP gel treatment/protocol led to a significant increased remineralization when compared to the other treatments/protocols and may be a promising strategy for patients with early caries lesions.

The effects of re-irradiation on the chemical and morphological properties of permanent teeth.

This study aimed to assess the in vitro effects of re-irradiation on enamel and dentin properties, simulating head and neck cancer radiotherapy retreatment. Forty-five human permanent molars were classified into five groups: non-irradiated; irradiated 60 Gy, and re-irradiated with doses of 30, 40, and 50 Gy. Raman spectroscopy, scanning electron microscopy (SEM), and energy dispersive x-ray spectroscopy (EDS) were employed for analysis. Raman spectroscopy assessed intensity, spectral area, and specific peaks comparatively. Statistical analysis involved Kolmogorov-Smirnov and One-Way ANOVA tests, with Tukey's post-test (significance level set at 5%). Significant changes in irradiated, non-irradiated, and re-irradiated enamel peaks were observed, including phosphate (438 nm), hydroxyapatite (582 nm), phosphate (960 nm), and carbonate (1070 nm) (p < 0.05). Re-irradiation affected the entire tooth (p > 0.05), leading to interprismatic region degradation, enamel prism destruction, and hydroxyapatite crystal damage. Dentin exhibited tubule obliteration, crack formation, and progressive collagen fiber fragmentation. EDX revealed increased oxygen percentage and decreased phosphorus and calcium post-reirradiation. It is concluded that chemical and morphological changes in irradiated permanent teeth were dose-dependent, exacerbated by re-irradiation, causing substantial damage in enamel and dentin.

The prevalence of developmental defects of enamel in people with cystic fibrosis: a systematic review.

BACKGROUND: Oral health impacts systemic health, individual well-being, and quality of life. It is important to identify conditions that may exacerbate oral disease to aid public health and policy development and promote targeted patient treatment strategies. Developmental defects can increase an individual's risk of dental caries, hypersensitivity, premature tooth wear, erosion, and poor aesthetics. As part of an ongoing study assessing oral health in adults with cystic fibrosis at Cork University Dental School and Hospital, a systematic review of available literature was conducted to assess the prevalence of enamel defects in people with cystic fibrosis. AIMS: To critically evaluate the literature to determine if the prevalence of developmental defects of enamel is higher in people with cystic fibrosis (PwCF). METHODS: Data Sources: Three online databases were searched Embase, Scopus, and Web of Science Core Collection. Studies that examined an association between cystic fibrosis and developmental defects of enamel were included in this systematic review. RESULTS: The initial search identified 116 publications from the following databases Embase, Web of Science Core Collection, and Scopus. Eleven studies were included for qualitative analysis. Nine studies concluded that PwCF had a higher prevalence of enamel defects than control people and one study found no difference in cystic fibrosis (CF) status. All studies had a risk of bias that may influence study results and their interpretation. CONCLUSIONS: The results of the systematic review show a consistent pattern that PwCF have a higher prevalence of DDE than people without CF. Genetic dysfunction, chronic systemic infections, and long-term antibiotic use are possible aetiological causes. This review highlights the need for future studies to investigate if DDEs are caused by the underlying CFTR mutation or as a consequence of disease manifestations and/or management.

[Research progress in regional odontodysplasia].

Regional odontodysplasia (ROD) is a rare localized dental developmental anomaly. The typical clinical manifestations of ROD are abnormal tooth eruption, abnormal development of enamel and dentin. The radiographic characteristic is "ghost teeth". Its etiology still remains unknown. The care and treatment of a patient with ROD needs a multidisciplinary approach. And the treatment should be taken after the assessment of each individual case of ROD. This paper reviews the definition, etiology, epidemiological features, clinical manifestations, imaging features, dental microstructure and treatment strategies of ROD to provide reference for clinical diagnosis and treatment.

A Wnt10a-Notch signaling axis controls Hertwig's epithelial root sheath cell behaviors during root furcation patterning.

Human with bi-allelic WNT10A mutations and epithelial Wnt10a knockout mice present enlarged pulp chamber and apical displacement of the root furcation of multi-rooted teeth, known as taurodontism; thus, indicating the critical role of Wnt10a in tooth root morphogenesis. However, the endogenous mechanism by which epithelial Wnt10a regulates Hertwig's epithelial root sheath (HERS) cellular behaviors and contributes to root furcation patterning remains unclear. In this study, we found that HERS in the presumptive root furcating region failed to elongate at an appropriate horizontal level in K14-Cre;Wnt10afl/fl mice from post-natal day 0.5 (PN0.5) to PN4.5. EdU assays and immunofluorescent staining of cyclin D1 revealed significantly decreased proliferation activity of inner enamel epithelial (IEE) cells of HERS in K14-Cre;Wnt10afl/fl mice at PN2.5 and PN3.5. Immunofluorescent staining of E-Cadherin and acetyl-α-Tubulin demonstrated that the IEE cells of HERS tended to divide perpendicularly to the horizontal plane, which impaired the horizontal extension of HERS in the presumptive root furcating region of K14-Cre;Wnt10afl/fl mice. RNA-seq and immunofluorescence showed that the expressions of Jag1 and Notch2 were downregulated in IEE cells of HERS in K14-Cre;Wnt10afl/fl mice. Furthermore, after activation of Notch signaling in K14-Cre;Wnt10afl/fl molars by Notch2 adenovirus and kidney capsule grafts, the root furcation defect was partially rescued. Taken together, our study demonstrates that an epithelial Wnt10a-Notch signaling axis is crucial for modulating HERS cell proper proliferation and horizontal-oriented division during tooth root furcation morphogenesis.

Japanese 17q12 Deletion Syndrome with Complex Clinical Manifestations.

17q12 deletion syndrome is a rare chromosomal anomaly with variable phenotypes, caused by the heterozygous deletion of chromosome 17q12. We herein report a 35-year-old Japanese patient with chromosomal 17q12 deletion syndrome identified by de novo deletion of the 1.46 Mb segment at the 17q12 band by genetic analyses. He exhibited a wide range of phenotypes, such as maturity-onset diabetes of the young (MODY) type 5, structural or functional abnormalities of the kidney, liver, and pancreas; facial dysmorphic features, electrolyte disorders; keratoconus, and acquired perforating dermatosis. This case report provides valuable resources concerning the clinical spectrum of rare 17q12 deletion syndrome.

Prenatal exposure to environmental toxins and comprehensive dental findings in a population cohort of children.

Environmental toxins are known to have many impacts on growth and development in humans, starting in utero. Alterations in amelogenesis, caused by chemical and physical trauma that occur during the antenatal, perinatal and postnatal time periods, may result in developmental defects in deciduous and permanent tooth enamel, as demonstrated in animal studies. These defects can be clinically visible and result in a variety of morphological and functional problems in the dentition. Since enamel does not remodel after formation, it may serve as a permanent record of insults during organ development.Our primary purpose was to investigate any possible relationship between intrauterine exposure to endocrine disrupting chemicals (phenols and phthalates) and developmental defects in enamel in children, while also accounting for fluoride exposure. Our secondary purpose was to report descriptively on findings from comprehensive dental examinations performed on 356 children that were drawn from the general paediatric population. A cohort of children from the Utah Children's Project (N = 356) that had full medical exams, comprehensive medical and family histories and available biospecimens were given extraoral and intraoral examinations. They also completed an oral health questionnaire. Standardized intraoral photographs were taken of the teeth and viewed by standardised examiners and the dental observations were recorded for a full inventory of findings, including: tooth morphology, caries, restorations, colorations, attrition, erosion, fractures and hypomineralization. Perinatal maternal urine samples were assessed for the concentration of fluoride, phenols and phthalates, including bisphenol A (BPA).Pairwise statistical analyses were done to correlate the dental findings with one another and with the presence of environment chemicals found in the urine samples. Hypomineralization was the most common finding (96% of children; 37% of deciduous teeth, 42% of permanent teeth), consistent with molar incisor hypomineralization (MIH) described in other human populations. No consistent correlations were seen between dental findings and the presence of phenols and phthalates in prenatal urine, but the number of samples available for the assessment was limited (n = 35).In conclusion, we found a high proportion of dental hypomineralization in a population based paediatric cohort, but did not find an association with prenatal exposure to phenols and phthalates.

The prevalence of developmental defects of enamel in a cohort of adults with cystic fibrosis - A cross sectional study.

OBJECTIVES: Cystic Fibrosis is an autosomal recessive condition. It is a multisystem disease treated with a broad range of pharmacological therapies, diet and nutrition, and physiotherapy. Previous studies suggest that people with cystic fibrosis have a higher prevalence of developmental defects of enamel which may place this population at a greater risk of developing oral diseases such as caries. The aim of this study was to assess a cohort of people with cystic fibrosis (PwCF) for the presence of developmental defects of enamel and compare the results with a control group of people without cystic fibrosis. METHODS: A cross sectional study involving 92 participants with cystic fibrosis and 92 controls was conducted in Cork University Dental School & Hospital. All participants completed a detailed questionnaire prior to undergoing a full clinical examination. The Developmental Defect of Enamel Index was used as a measurement index. All data was statistically analysed with the help of statisticians from Cystic Fibrosis Registry of Ireland. RESULTS: 64 % (n = 59) of PwCF had enamel defects compared to just 30 % (n = 28) of people without cystic fibrosis. The median number of teeth affected by enamel defects in the study group was 1.5, compared to 0 in the control group. CONCLUSION: In this study the cohort of PwCF had more enamel defects than people without CF. Further research is required to investigate the aetiology of these findings. CLINICAL SIGNIFICANCE: Clinicians should be vigilant after teeth have erupted in PwCF as they may have an increased susceptibility to developmental defects of enamel.

Cervical enamel projections from a periodontal perspective: A scoping review.

Cervical enamel projections (CEPs) represent a unique developmental and anatomical anomaly wherein the enamel structure extends apically beyond the cemento-enamel junction of the tooth. In this scoping review, the existing literature on CEPs was evaluated to delineate their characteristics, prevalence, predilection for specific teeth and surfaces, clinical significance, and management approaches. Searches were conducted on MEDLINE (PubMed), Cochrane Library, and Embase databases using the keywords "enamel projection(s)" or "ectopic enamel." In total, 24 studies meeting inclusion criteria were included in the review. The prevalence of CEPs varied widely (8.3%-85.1%), predominantly manifesting as grade I or grade III. Mandibular first and second molars exhibited a higher incidence of CEPs, with a notable predilection for buccal surfaces. The consensus in most studies was that CEPs are associated with localized periodontal diseases. Recommendations inclined toward the removal of ectopic enamel during periodontal surgery to enhance periodontal attachment formation. However, decision-making should involve careful consideration of the benefits and drawbacks based on individual circumstances.

Caracterização de lesões de mancha branca naturais / Characterization of natural white spot lesions

O objetivo deste estudo foi caracterizar e comparar o esmalte sadio humano e lesões de mancha branca (ICDAS 2) em diferentes aspectos. Dezessete espécimes foram caracterizados por meio fluorescência com o Diagnodent®, Fluorescência quantitativa induzida pela luz (QLF®), quanto aspectos ópticos pela Tomografia de Coerência Óptica (OCT), propriedades mecânicas com a Microdureza seccional e avaliação do conteúdo inorgânico e orgânico com a Espectroscopia Raman. A ANOVA e teste de Tukey, foram utilizados com 5% como nível de significância. O Diagnodent® identificou 75% das superfícies como hígidas, 7% cárie em esmalte, 10% lesão até junção esmalte-dentina e 7% cárie em dentina. Para o QLF®, a perda de conteúdo mineral Q (%mm2) foi de 15,37%mm2 e a diferença de fluorescência (F) foi de 11,68%. O aparelho OCT captou uma média de profundidade de lesões de 174,43 m, e um coeficiente de atenuação sem diferença significante (p>0,005). A microdureza demonstrou uma diferença significante (p<0,005) quando comparados os fatores: camada superficial e corpo do esmalte (hígido e lesão), porém não existe diferença significante (p>0,005), quando comparados esses dois sítios dentro do mesmo substrato. O espectro Raman demonstrou as 4 bandas vibracionais do fosfato (v1, v2, v3, v4) com maior intensidade no esmalte hígido, sendo o maior pico em 960,3 cm-1(v1). Em 1071 cm-1, a intensidade foi maior para o esmalte hígido, correspondendo a banda do fosfato (v3) e não o carbonato tipo B. O conteúdo orgânico foi visto em 1295 cm-1 e em 1450 cm-1, com maior intensidade nas lesões. A variabilidade de características dos substratos estudados interferiu diretamente na caracterização destes pelos métodos propostos.

Effect of Polyphenols on the Ultrastructure of the Dentin Pellicle and Subsequent Erosion.

INTRODUCTION: Erosive tooth wear is a highly prevalent dental condition that is modified by the ever-present salivary pellicle. The aim of the present in situ study was to investigate the effect of polyphenols on the ultrastructure of the pellicle formed on dentin in situ and a subsequent erosive challenge. METHODS: The pellicle was formed on bovine dentin specimens for 3 min or 2 h in 3 subjects. After subjects rinsed with sterile water (negative control), 1% tannic acid, 1% hop extract, or tin/fluoride solution containing 800 ppm tin and 500 ppm fluoride (positive control), specimens were removed from the oral cavity. The erosive challenge was performed on half of the specimens with 1% citric acid, and all specimens were analyzed by transmission electron microscopy. Incorporation of tannic acid in the pellicle was investigated by fluorescence spectroscopy. RESULTS: Compared to the negative control, ultrastructural analyses reveal a thicker and electron-denser pellicle after application of polyphenols, in which, according to spectroscopy, tannic acid is also incorporated. Application of citric acid resulted in demineralization of dentin, but to a lesser degree when the pellicle was pretreated with a tin/fluoride solution. The pellicle was more acid-resistant than the negative control when modified with polyphenols or tin/fluoride solution. CONCLUSION: Polyphenols can have a substantial impact on the ultrastructure and acid resistance of the dentin pellicle, while the tin/fluoride solution showed explicit protection against erosive demineralization.

Pomegranate extract in polyphosphate-fluoride mouthwash reduces enamel demineralization.

OBJECTIVES: To evaluate the anti-demineralizing effect of a mouthwash comprising pomegranate peel extract (PPE 3%), sodium trimetaphosphate (TMP 0.3%), and fluoride (F 225 ppm) in an in situ study, and to assess its irritation potential in an ex vivo study. METHODS: This double-blind crossover study was conducted in four phases with 7 days each. Twelve volunteers used palatal appliances containing enamel blocks, which were subjected to cariogenic challenges. The ETF formulation (PPE + TMP + F, pH 7.0), TF formulation (TMP + F, pH 7.0), deionized water (W, pH 7.0), and essential oil commercial mouthwash (CM, 220 ppm F, pH 4.3) were dropped onto the enamel twice daily. The percentage of surface hardness loss, integrated loss of subsurface hardness, calcium, phosphorus, and fluoride in enamel and biofilms were determined. In addition, alkali-soluble extracellular polysaccharide concentrations were analyzed in the biofilms. The irritation potential was evaluated using the hen's egg chorioallantoic membrane test through the vascular effect produced during 300-s of exposure. RESULTS: ETF was the most efficacious in preventing demineralization. It also showed the highest concentrations of calcium and phosphorus in the enamel and in the biofilm, as well as the lowest amount of extracellular polysaccharides in the biofilm. In the eggs, ETF produced light reddening, whereas CM led to hyperemia and hemorrhage. CONCLUSIONS: The addition of PPE to formulations containing TMP and F increased its anti-demineralizing property, and this formulation presented a lower irritation potential than the CM. CLINICAL RELEVANCE: ETF can be a promising alternative alcohol-free mouthwash in patients at high risk of caries.

Evaluation of ER;CR:YSGG Laser and Remineralization Agents on Mineral Density and Ion Levels of Primary and Permanent Enamel.

Objective: The aim of this study is to evaluate the efficacy of two different fluoride varnishes used alone or in combination with laser treatment on permanent and primary tooth enamel. Methods: Ninety-six primary and 96 permanent molar samples were divided into six groups. The levels of calcium, phosphorus, fluoride, and silver ions of each sample were analyzed using energy-dispersive X-ray spectroscopy (EDS). Six different treatments were applied to 12 different groups (n = 15) as control (g1/G1), fluoride varnish (g2/G2), casein phosphopeptide-amorphous calcium phosphate (CPP-ACP)-fluoride varnish (g3/G3), laser (g4/G4), laser+fluoride varnish (g5/G5), and laser+CPP-ACP-fluoride varnish (g6/G6). After the procedures, ion levels were reanalyzed with EDS. The teeth were subjected to the artificial caries-forming procedure and ion levels were again evaluated by EDS. One sample from each group was prepared separately for the focused ion beam-scanning electron microscope measurement; initial and final images were recorded. The obtained data were statistically analyzed with the SPSS 23.0 program. Results: Compared with the initial measurement, phosphorus percentages increased in most of the groups in the last measurement. Calcium percentages of primary teeth increased in the last measurement, except for the g1 group, but in permanent teeth, there was an increase only in the G6 group. There was a statistically significant difference between g1/G1 and g6/G6 groups in the last measurement of phosphorus and calcium percentages. Conclusions: The combined use of laser with CPP-ACP-fluoride varnish enhanced remineralization in the primary and permanent teeth. However, in permanent teeth, the use of laser alone was not as effective as in primary teeth. Therefore, combined usage with CPP-ACP-fluoride varnish can enhance its efficacy. This in vitro study was approved by the local ethics committee of Hacettepe University (Project No.: GO 20/441).

Color stability of bleached tooth enamel brushed with different stain-removing toothpastes.

OBJECTIVE: The effects of four toothpastes on the color stability of in-office bleached tooth specimens were determined. MATERIALS AND METHODS: We evaluated an experimental toothpaste (EXP) and three commercially available toothpastes: Colgate Optic White (OPW), Aquafresh White & Protect (AWP), and Crest 3D White (CDW). OPW, AWP, and CDW contained inorganic abrasives, whereas EXP and AWP contained sodium polyphosphate. Forty-eight randomly selected human-extracted maxillary central incisors were bleached and brushed twice daily over 30 days. We analyzed the final color difference (ΔE*ab, ΔE00 , ΔWID ), arithmetic average surface roughness (Ra) of the enamel measured on days 0 and 30, and scanning electron microscopy images of enamel surfaces and toothpastes. ΔE*ab, ΔE00 , ΔWID , and Ra were analyzed using one-way analysis of variance and Tukey's test (α = 0.05). RESULTS: ΔE*ab and ΔE00 values were significantly lower after toothbrushing with EXP, OPW, and CDW than with AWP. OPW induced the greatest positive ΔWID . Ra was significantly increased by OPW and CDW, but slightly increased by AWP, with cube-like particles, and EXP, with no particle-like structures. CONCLUSIONS: Only EXP stabilized the color of bleached teeth without increasing the enamel surface roughness. Sodium polyphosphate with approximately 10 phosphate groups was effective at removing stains. CLINICAL SIGNIFICANCE: The effect of toothpaste on the color stability of bleached teeth depends on the constituting abrasives and chemical components. Polyphosphoric acid has different stain-removal effects depending on its degree of polymerization. Additionally, although certain types of abrasives may be effective for color stability, they also increase the surface roughness of the enamel.

Association between molar hypomineralization, genes involved in enamel development, and medication in early childhood: A preliminary study.

BACKGROUND: Molar hypomineralization (MH) is defined as a multifactorial condition, and thus, its presence may be defined by interactions between environmental and genetic factors. AIM: To evaluate the association between MH, genes involved in enamel development, and the use of medication during pregnancy in early childhood. DESIGN: One hundred and eighteen children, 54 with and 64 without MH, were studied. The data collected included demographics, socioeconomic data, and the medical history of mothers and children. Genomic DNA was collected from saliva. Genetic polymorphisms in ameloblastin (AMBN; rs4694075), enamelin (ENAM; rs3796704, rs7664896), and kallikrein (KLK4; rs2235091) were evaluated. These genes were analyzed by real-time polymerase chain reaction using TaqMan chemistry. The software PLINK was used to compare allele and genotype distributions of the groups and to assess the interaction between environmental variables and genotypes (p < .05). RESULTS: The variant allele KLK4 rs2235091 was associated with MH in some children (odds ratio [OR]: 3.75; 95% confidence interval [CI] = 1.65-7.81; p = .001). Taking medications in the first 4 years of life was also associated with MH (OR: 2.94; 95% CI = 1.02-6.04; p = .041) and specifically in association with polymorphisms in ENAM, AMBN, and KLK4 (p < .05). The use of medications during pregnancy was not associated with MH (OR: 1.37; 95% CI = 0.593-3.18; p = .458). CONCLUSION: The results of this study suggest that taking medication in the postnatal period appears to contribute to the etiology of MH in some evaluated children. There may be a possible genetic influence of polymorphisms in the KLK4 gene with this condition.

A Comparison of the Enamel Remineralisation Potential of Self-Assembling Peptides.

BACKGROUND: The aim of this research was to compare the efficacy of the remineralising potential of self-assembling peptides (SAPs): Curodont Repair (P11-4), P26, and leucine-rich amelogenin peptides (LRAP) with the standard 5% NaF varnish (Duraphat) on early enamel caries lesions (EECLs). METHODS: A demineralising solution (DS) was used to create artificial EECLs in human dental enamel specimens, which were randomly allocated to treatment groups: P11-4; P26 solution; LRAP solution; 5% NaF varnish; and deionised water (DIW). Each specimen was subjected to 8 days of pH cycling. Specimens from each test group were subjected to microcomputed tomography (micro-CT) and nanomechanical testing to assess mineral density (MD), hardness (H), and elastic modulus (EM) properties of sound, demineralised, and treated enamel. RESULTS: The mean MD percentage gain was highest in the P26 and P11-4 groups, followed by the LRAP, 5% NaF varnish, and DIW groups. There were statistically significant differences amongst groups. In the outer layer of EECLs, the EM and H were highest in P26 and P11-4 groups, followed by the LRAP and 5% NaF varnish. In the inner layer of EECLs, the EM and H were highest in P11-4 and P26 groups, indicative of enhanced penetration and remineralisation of the deeper parts of the artificial EECLs. CONCLUSIONS: P26 and P11-4 SAPs are more effective than 5% NaF varnish in remineralising the depth of EECLs.

Evaluation of the shear bond strength of various adhesives on the surface of enamel irradiated with various doses of radiotherapy.

INTRODUCTION: We aimed to compare the shear bond strength (SBS) forces on the enamel surface with 2 adhesives after treatment with various radiation doses. METHODS: A total of 120 premolars were included in the study. The teeth were randomly divided into 5 main groups (n = 24): negative control (without aging), positive control (with aging), 40 Gy, 60 Gy, and 70 Gy radiation. The 40 Gy, 60 Gy, and 70 Gy groups underwent conventional radiotherapy 5 days a week with a dose of 2 Gy each day. After the radiotherapy, all samples except the negative control group were subjected to thermal cycle aging. In all 5 groups, the specimens were divided into 2 subgroups, and half were bonded using 2 adhesives. After bonding, the universal Shimadzu test device was used to analyze the SBS. After the test, the tooth surfaces were examined under a stereomicroscope to determine the adhesive remnant index. RESULTS: When adhesives were compared, Biofix adhesive's bond strength value was statistically higher in the 40 Gy group than in the Transbond XT group (P = 0.001). The SBS value was higher in all irradiated groups than in nonirradiated groups (P = 0.001). When the adhesive remnant index score was analyzed, no significant difference was found among the groups. CONCLUSIONS: The SBS increased in irradiated teeth compared with unirradiated teeth, and the SBS values of both adhesives were within the acceptable limits in all radiation groups.

Study on the role of nano antibacterial materials in orthodontics (a review) / Estudo sobre o papel dos materiais nanoantibacterianos na ortodontia

Nanoparticles (NPs) are insoluble particles with a diameter of fewer than 100 nanometers. Two main methods have been utilized in orthodontic therapy to avoid microbial adherence or enamel demineralization. Certain NPs are included in orthodontic adhesives or acrylic resins (fluorohydroxyapatite, fluorapatite, hydroxyapatite, SiO2, TiO2, silver, nanofillers), and NPs (i.e., a thin layer of nitrogen-doped TiO2 on the bracket surfaces) are coated on the surfaces of orthodontic equipment. Although using NPs in orthodontics may open up modern facilities, prior research looked at antibacterial or physical characteristics for a limited period of time, ranging from one day to several weeks, and the limits of in vitro studies must be understood. The long-term effectiveness of nanotechnology-based orthodontic materials has not yet been conclusively confirmed and needs further study, as well as potential safety concerns (toxic effects) associated with NP size.

Nanopartículas (NPs) são partículas insolúveis com diâmetro inferior a 100 nanômetros. Dois métodos principais têm sido utilizados na terapia ortodôntica para evitar a aderência microbiana ou a desmineralização do esmalte: NPs são incluídas em adesivos ortodônticos ou resinas acrílicas (fluoro-hidroxiapatita, fluorapatita, hidroxiapatita, SiO2, TiO2, prata, nanopreenchimentos) e NPs são revestidas nas superfícies de equipamentos ortodônticos, ou seja, uma camada fina de TiO2 dopado com nitrogênio nas superfícies do braquete. Embora o uso de NPs em ortodontia possa tornar acessível modernos recursos, pesquisas anteriores analisaram as características antibacterianas ou físicas por um período limitado de tempo, variando de 24 horas a várias semanas, por isso devem ser compreendidos os limites dos estudos in vitro. A eficácia de longo prazo de materiais ortodônticos com base em nanotecnologia ainda não foi confirmada de forma conclusiva, o que exige mais estudos, bem como potenciais preocupações de segurança (efeitos tóxicos) associadas ao tamanho da NP.

Color and surface roughness alterations of bulk-fill resin composites submitted to simulated toothbrushing with whitening dentifrices

Aim: To evaluate the surface roughness and color stability of bulk-fill resin composites after simulated toothbrushing with whitening dentifrices. The radioactive/relative dentin abrasion (RDA) and radioactive/relative enamel abrasion (REA) of dentifrices were also assessed. Methods: Specimens (n=10) of Tetric N Ceram Bulk Fill (TNCB), Filtek One Bulk Fill (FOB) resin composites, and Z100(Control) were prepared using a cylindrical Teflon matrix. Surface roughness (Ra, µm) was assessed by a roughness meter and the color evaluations (ΔEab , ΔE00 , WID ) were performed using a digital spectrophotometer based on the CIELAB system. Three measurements were performed per sample, before and after simulated toothbrushing with 3D Oral-B White Perfection (3DW) and Black is White (BW) dentifrices. The abrasivity (REA and RDA values) of the used dentifrices was also determined by the Hefferren abrasivity test. Results: The Ra values increased significantly in all resin composites after 3DW and BW toothbrushing. The acceptable threshold color varied among resin composites, and TNCB and Z100 presented the highest ΔEab and ΔE00 for BW dentifrice. The 3DW dentifrice was significantly more abrasive than BW dentifrice on enamel and dentin. Conclusions: simulated toothbrushing with tested whitening dentifrices increased the surface roughness at acceptable levels. The Tetric N Ceram Bulk-fill and Z100 composite showed the highest color alteration in BW. 3D White Perfection dentifrice was more abrasive on dentin and enamel than Black is White.

A new role for resveratrol: Protection of enamel against erosion.

OBJECTIVE: The aim of this study was to determine the effect of different concentrations of resveratrol in protecting enamel against initial dental erosion in vitro. METHODS: Ninety bovine enamel samples (4 × 4 mm) were divided into six groups: Phosphate buffered saline (negative control; PBS), Commercial solution (Elmex Erosion Protection™; positive control) and resveratrol at 4 different concentrations (1, 10, 100 or 400 µg/mL). Initially, the samples were incubated in saliva for the formation of the acquired pellicle (250 µL, 1 h, 37 °C, 250 rpm). Afterward, the samples were incubated in the respective treatments (250 µL, 1 min, 37 °C, 250 rpm) and then reincubated in saliva (250 µL, 1 h, 37 °C, 250 rpm). Finally, the samples were subjected to an erosive challenge by incubating in 1 % citric acid (1 mL, pH 3.5, 1 min, 25 °C, 250 rpm). The percentage surface microhardness change (% SMC) was assessed using a microhardness tester. Data were analyzed by Kruskal-Wallis and Dunn's tests (p < 0.05). RESULTS: The treatments with Elmex™ and resveratrol (1, 10 and 100 µg/mL) significantly protected enamel compared to the negative control, without significant differences among them. However, the group treated with the highest resveratrol concentration (400 µg/mL) did not show a significant difference from the negative control. CONCLUSIONS: Resveratrol at concentrations ranging from 1 to 100 µg/ml was effective in preventing loss of enamel surface microhardness. CLINICAL SIGNIFICANCE: This result suggests a potential new direction for the development of dental products based on resveratrol for the prevention of dental erosion.